Test the pickup by sticking the probes of an ohm meter into the slots, you should get a reading of like 140-180 ohms. Thats the range specified for my 88' anyways...yup just checkd the book, 82-84 and 88 140-180 ohms. air gap should be set to between .008 and .016 for all models through 88'.
Most parts places around here tell me the pickup is non replaceable and an integrated part of the distributor...let alone "no longer available". I laughed at the Schucks counter man and went home where I propmptly ordered one from RockAuto on the east coast. Problem solved.
There really isnt anyway to test the igniter that I am aware of. Generally they work one minute and are gone the next with no in-between. Find somebody with a similar ignition as yours and buy them a beer for letting you try their igniter on your system. If it works then buy one. If it dont then you just saved yourself some serious $$$. I hate people that throw parts at a problem...if they are so willing to throw their hardearned away...I'll give them my address. Did you bother checking all your fuses? Incab and engine compartment?
~Darin <img border="0" alt="[Baby]" title="" src="graemlins/baby.gif" />


88' 4x4 *22R-EB Gen II*
87' $Runner *22R-EB Gen I*
85' Sillyca 22R-Esq

"I LIVE IN MY OWN WORLD...THEY KNOW ME WELL THERE"