crank PULLEY removal ??

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

thanks isuzu95. Sounds the simplest so far. But... [Re: isuzu95] #525207 12/02/04 09:33 PM

Joined: Apr 2004

Posts: 310

trooperbc

Mudrunner

Picture?
I'm having a bit of a problem actually visualizing how all the pieces of your tool all go together.

?? And, exactly why does this "scissor"-spanner approach safely hold the crank/pulley from rotating while a single bar can't. ?? And...it's good for the 123 ft.lbs. needed to retorque?

Any chance you've got a picture? or drawing?

Thanks.

Last edited by trooperbc; 12/02/04 09:38 PM.

Entire Thread
Subject	Posted By	Posted
crank PULLEY removal ??	trooperbc	11/12/04 09:32 PM
Re: crank PULLEY removal ??	mlclark	11/13/04 07:24 AM
Re: crank PULLEY removal ??	Lor	11/13/04 07:29 AM
Re: crank PULLEY removal ??	Anonymous	11/13/04 12:52 PM
Re: crank PULLEY removal ??	isuzu95	11/13/04 04:40 PM
Re: crank PULLEY removal ??	slappy	11/13/04 05:03 PM
Re: crank PULLEY removal ??	trooperbc	11/13/04 08:49 PM
Re: crank PULLEY removal ??	mlclark	11/13/04 11:14 PM
Re: crank PULLEY removal ??	Anonymous	11/14/04 12:59 AM
Re: crank PULLEY removal ??	NATO308	11/14/04 03:54 AM
Re: crank PULLEY removal ??	trooperbc	11/17/04 09:49 PM
Re: crank PULLEY removal ??	taro	11/19/04 06:58 AM
"edc's tool"... ??	trooperbc	11/24/04 02:38 AM
Re: "edc's tool"... ??	taro	11/29/04 03:40 PM
Re: "edc's tool"... ??	isuzu95	11/29/04 07:28 PM
thanks isuzu95. Sounds the simplest so far. But...	trooperbc	12/02/04 09:33 PM
Spanner sketch	LetsRodeo	12/03/04 05:21 AM
Spanner sketch:Terrific,Thanks! ?Question about equal torque and design...	trooperbc	12/06/04 09:34 PM
Re: Spanner sketch:Terrific,Thanks! ?Question about equal torque and design...	LetsRodeo	12/07/04 03:50 AM
Ed C Crank Pulley Tool pictures	trooperbc	12/07/04 11:46 PM
Re: Ed C Crank Pulley Tool pictures	LetsRodeo	12/08/04 05:24 AM
A couple more questions...please	trooperbc	12/09/04 09:59 PM
Re: A couple more questions...please	randii	12/10/04 08:28 AM
Isuzu95.Questions about your wolmonized crank holder tool.	trooperbc	12/13/04 11:14 PM
Re: Isuzu95.Questions about your wolmonized crank holder tool.	NATO308	12/18/04 03:39 AM
ThanksNATO308 for pipe wrench/pulley picture! ANY damage?	trooperbc	12/18/04 08:43 PM
Re: ThanksNATO308 for pipe wrench/pulley picture! ANY damage?	NATO308	01/10/05 07:59 AM
Re: Isuzu95.Questions about your wolmonized crank holder tool.	isuzu95	12/19/04 06:54 AM
Re: Isuzu95.Questions about your wolmonized crank holder tool.	mlclark	12/19/04 07:05 AM
One man's headache is another man's .... (but thanks)	trooperbc	12/20/04 11:10 PM
Re: One man's headache is another man's .... (but thanks)	mlclark	12/21/04 01:14 AM
No offense intended, just trying for the best solution...	trooperbc	12/21/04 11:27 PM
Re: No offense intended, just trying for the best solution...	mlclark	12/22/04 07:54 AM
Re: No offense intended, just trying for the best solution...	isuzu95	12/22/04 04:20 PM
Re: Isuzu95.thanks for the...	trooperbc	12/20/04 11:15 PM
Thanks Taro	trooperbc	11/29/04 10:42 PM
Re: crank PULLEY removal ??	LetsRodeo	12/01/04 01:42 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.498s Queries: 16 (3.496s) Memory: 0.6745 MB (Peak: 0.7134 MB) Data Comp: Off Server Time: 2026-06-19 06:51:15 UTC
Valid HTML 5 and Valid CSS