Fender to wheel measurement requests.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Fender to wheel measurement requests. [Re: Brian894X4] #526830 11/16/04 07:35 AM

Joined: Dec 2003

Posts: 72

TAucoin

Getting the Wheeling Fever

I remember reading somewhere that the stock measurement was around 13.5" I believe it was at off-road.com. I have a 94' and cranked torsion bars and my rim to fender measurmeant is 15" all the way aroud.

Entire Thread
Subject	Posted By	Posted
Fender to wheel measurement requests.	Brian894X4	11/16/04 05:08 AM
Re: Fender to wheel measurement requests.	TAucoin	11/16/04 07:35 AM
Re: Fender to wheel measurement requests.	Anonymous	11/16/04 04:39 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.777s Queries: 16 (3.775s) Memory: 0.5940 MB (Peak: 0.6270 MB) Data Comp: Off Server Time: 2026-06-22 00:55:01 UTC
Valid HTML 5 and Valid CSS