I remember with my cousins first gen the shifter was sensitive to the sequence comming out of park. Meaning you couldn't do it quickly like most trans w/ shift lock.

On my second gen though, the problem is quite the opposite. My shifter does not lock at all. Meaning regardless of anything (engine, key position, brake..) the shifter will flow from park down to drive WITHOUT even having to push in the shifter button.

My button is only used to get the shifter from drive back into reverse. But from park to reverse or reverse to park the button does not have to be used.

I found this very dangerous, in an instance where I do not use the parking brake and a passenger slightly taps the shifter it drops out of park very easily. The shifter moves so easily that I can see it dropping out if I were bumped in a parking lot.

Visited the dealer three time and all three time the replace the shifter assembly. After mere days its back to its non-functional ways.

Tired of the dealer, I just use the p-brake all the time.


Well this wasn't of ANY help to your problem, but just thought Id share with you the otherside of the problem.

Ashby


'00 Rodeo LSE 4WD, 3.2, Black, LSD, OME 919s w/ 2in Spacers, Superwinch Hubs, RS9KXLs, Indy4x steel braided brake lines, LT 265-75-16 MT/Rs, ShrockBars, DOR HD rear Lat. Bar, MagnaFlow.