DO'S and DON'T for welders

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: DO'S and DON'T for welders [Re: OffRodEO] #529315 11/22/04 11:50 PM

Joined: Apr 2003

Posts: 1,994

Under my wifes RODEO in EastTN

Bansil

Body Damage is Cool

A couple cheap wire brushes(hand kind) are good.
A wire rope brush for the grinder would be a cheap necessity for cleaning frame etc.
You need a minumum of a 135amp welder.
Some clamps would be nice.....I like Kant twist clamps,
they are $$$ but well worth the extra $$

Bansil

98 Rodeo(hers)
00 Rodeo(his)

Lisa's Rodeo

Entire Thread
Subject	Posted By	Posted
DO'S and DON'T for welders	OffRodEO	11/22/04 08:07 PM
Re: DO'S and DON'T for welders	matthew	11/22/04 10:25 PM
Re: DO'S and DON'T for welders	Bigpoppax2	11/22/04 10:33 PM
Re: DO'S and DON'T for welders	RobG	11/22/04 10:40 PM
Re: DO'S and DON'T for welders	OffRodEO	11/22/04 11:32 PM
Re: DO'S and DON'T for welders	Bansil	11/22/04 11:27 PM
Re: DO'S and DON'T for welders	Bansil	11/22/04 11:50 PM
Re: DO'S and DON'T for welders	Bansil	11/22/04 11:52 PM
Re: DO'S and DON'T for welders	Starchild	11/23/04 12:21 AM
Re: DO'S and DON'T for welders	Paddler	11/23/04 04:06 PM
Re: DO'S and DON'T for welders	OffRodEO	11/23/04 04:14 PM
Re: DO'S and DON'T for welders	RobG	11/23/04 05:00 PM
Re: DO'S and DON'T for welders	Jonesy	11/23/04 06:27 PM
Re: DO'S and DON'T for welders	RobG	11/23/04 06:46 PM
Re: DO'S and DON'T for welders	kobyhud	11/23/04 07:17 PM
Re: DO'S and DON'T for welders	OffRodEO	11/23/04 08:04 PM
Re: DO'S and DON'T for welders	RobG	11/23/04 08:39 PM
Re: DO'S and DON'T for welders	Chris Perosi	11/23/04 08:50 PM
Re: DO'S and DON'T for welders	ShowMeDave	11/23/04 09:44 PM
Re: DO'S and DON'T for welders	Paddler	11/23/04 10:15 PM
Re: DO'S and DON'T for welders	RobG	11/23/04 10:28 PM
Re: DO'S and DON'T for welders	kobyhud	11/23/04 11:06 PM
Re: DO'S and DON'T for welders	ZooMigo	11/25/04 05:09 PM
Re: DO'S and DON'T for welders	Anonymous	11/26/04 07:23 PM
Re: DO'S and DON'T for welders	Curtis Johnson	11/26/04 08:24 PM
Re: DO'S and DON'T for welders	OffRodEO	12/13/04 08:58 PM
Re: DO'S and DON'T for welders	Chris Perosi	12/15/04 09:53 PM
Re: DO'S and DON'T for welders	Anonymous	11/29/04 10:17 PM
Re: DO'S and DON'T for welders	OffRodEO	11/29/04 11:48 PM
Re: DO'S and DON'T for welders	kobyhud	11/30/04 12:15 AM
Re: DO'S and DON'T for welders	Paddler	11/30/04 02:46 PM
Re: DO'S and DON'T for welders	RobG	11/30/04 03:13 PM
Re: DO'S and DON'T for welders	Anonymous	11/30/04 08:02 PM
Re: DO'S and DON'T for welders	OffRodEO	11/30/04 08:15 PM
Re: DO'S and DON'T for welders	mlclark	11/30/04 08:20 PM
Re: DO'S and DON'T for welders	OffRodEO	11/30/04 08:37 PM
Re: DO'S and DON'T for welders	Jonesy	11/30/04 09:20 PM
Re: DO'S and DON'T for welders	mlclark	11/30/04 09:45 PM
Re: DO'S and DON'T for welders	RobG	11/30/04 09:54 PM
Re: DO'S and DON'T for welders	Anonymous	11/30/04 10:10 PM
Re: DO'S and DON'T for welders	Paddler	11/30/04 10:13 PM
Re: DO'S and DON'T for welders	OffRodEO	12/01/04 05:03 PM
Re: DO'S and DON'T for welders	RobG	12/01/04 05:14 PM
Re: DO'S and DON'T for welders	Jonesy	12/01/04 05:31 PM
Re: DO'S and DON'T for welders	RobG	12/01/04 05:53 PM
Re: DO'S and DON'T for welders	pplotz	12/01/04 06:03 PM
Re: DO'S and DON'T for welders	kobyhud	12/01/04 06:53 PM
Re: DO'S and DON'T for welders	Chris Perosi	12/01/04 07:29 PM
Re: DO'S and DON'T for welders	Sammy	12/01/04 07:30 PM
Re: DO'S and DON'T for welders	RobG	12/01/04 07:41 PM
Re: DO'S and DON'T for welders	RobG	12/01/04 07:36 PM
Re: DO'S and DON'T for welders	Anonymous	11/30/04 08:47 PM
Re: DO'S and DON'T for welders	Anonymous	12/01/04 08:22 PM
Re: DO'S and DON'T for welders	kobyhud	12/01/04 08:50 PM
Re: DO'S and DON'T for welders	Anonymous	12/01/04 09:19 PM
Re: DO'S and DON'T for welders	OffRodEO	12/01/04 10:42 PM
Re: DO'S and DON'T for welders	Jonesy	12/01/04 11:09 PM
Re: DO'S and DON'T for welders	OffRodEO	12/01/04 11:44 PM
Re: DO'S and DON'T for welders	Paddler	12/02/04 12:50 AM
Re: DO'S and DON'T for welders	pplotz	12/02/04 06:57 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.667s Queries: 16 (3.664s) Memory: 0.7257 MB (Peak: 0.7707 MB) Data Comp: Off Server Time: 2026-06-10 16:53:21 UTC
Valid HTML 5 and Valid CSS