DO'S and DON'T for welders

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: DO'S and DON'T for welders [Re: ShowMeDave] #529328 11/23/04 10:15 PM

Joined: May 2001

Posts: 1,628

Paddler

Body Damage is Cool

I disagree with Koby's assessment of the Harbor Freight tools. I have had my angle grinder for years and it hasn't failed me yet as well as my rachets. My craftsman rachets have both broke as well as one of my snap ons but never my Pittsburgh wrenches from Harbor Freight.

1995 Honda Passport;
Some people wait a life time for their ship to sail in, while others simple grab the oars and begin paddling
Yours truely
http://www.zutah.com

Entire Thread
Subject	Posted By	Posted
DO'S and DON'T for welders	OffRodEO	11/22/04 08:07 PM
Re: DO'S and DON'T for welders	matthew	11/22/04 10:25 PM
Re: DO'S and DON'T for welders	Bigpoppax2	11/22/04 10:33 PM
Re: DO'S and DON'T for welders	RobG	11/22/04 10:40 PM
Re: DO'S and DON'T for welders	OffRodEO	11/22/04 11:32 PM
Re: DO'S and DON'T for welders	Bansil	11/22/04 11:27 PM
Re: DO'S and DON'T for welders	Bansil	11/22/04 11:50 PM
Re: DO'S and DON'T for welders	Bansil	11/22/04 11:52 PM
Re: DO'S and DON'T for welders	Starchild	11/23/04 12:21 AM
Re: DO'S and DON'T for welders	Paddler	11/23/04 04:06 PM
Re: DO'S and DON'T for welders	OffRodEO	11/23/04 04:14 PM
Re: DO'S and DON'T for welders	RobG	11/23/04 05:00 PM
Re: DO'S and DON'T for welders	Jonesy	11/23/04 06:27 PM
Re: DO'S and DON'T for welders	RobG	11/23/04 06:46 PM
Re: DO'S and DON'T for welders	kobyhud	11/23/04 07:17 PM
Re: DO'S and DON'T for welders	OffRodEO	11/23/04 08:04 PM
Re: DO'S and DON'T for welders	RobG	11/23/04 08:39 PM
Re: DO'S and DON'T for welders	Chris Perosi	11/23/04 08:50 PM
Re: DO'S and DON'T for welders	ShowMeDave	11/23/04 09:44 PM
Re: DO'S and DON'T for welders	Paddler	11/23/04 10:15 PM
Re: DO'S and DON'T for welders	RobG	11/23/04 10:28 PM
Re: DO'S and DON'T for welders	kobyhud	11/23/04 11:06 PM
Re: DO'S and DON'T for welders	ZooMigo	11/25/04 05:09 PM
Re: DO'S and DON'T for welders	Anonymous	11/26/04 07:23 PM
Re: DO'S and DON'T for welders	Curtis Johnson	11/26/04 08:24 PM
Re: DO'S and DON'T for welders	OffRodEO	12/13/04 08:58 PM
Re: DO'S and DON'T for welders	Chris Perosi	12/15/04 09:53 PM
Re: DO'S and DON'T for welders	Anonymous	11/29/04 10:17 PM
Re: DO'S and DON'T for welders	OffRodEO	11/29/04 11:48 PM
Re: DO'S and DON'T for welders	kobyhud	11/30/04 12:15 AM
Re: DO'S and DON'T for welders	Paddler	11/30/04 02:46 PM
Re: DO'S and DON'T for welders	RobG	11/30/04 03:13 PM
Re: DO'S and DON'T for welders	Anonymous	11/30/04 08:02 PM
Re: DO'S and DON'T for welders	OffRodEO	11/30/04 08:15 PM
Re: DO'S and DON'T for welders	mlclark	11/30/04 08:20 PM
Re: DO'S and DON'T for welders	OffRodEO	11/30/04 08:37 PM
Re: DO'S and DON'T for welders	Jonesy	11/30/04 09:20 PM
Re: DO'S and DON'T for welders	mlclark	11/30/04 09:45 PM
Re: DO'S and DON'T for welders	RobG	11/30/04 09:54 PM
Re: DO'S and DON'T for welders	Anonymous	11/30/04 10:10 PM
Re: DO'S and DON'T for welders	Paddler	11/30/04 10:13 PM
Re: DO'S and DON'T for welders	OffRodEO	12/01/04 05:03 PM
Re: DO'S and DON'T for welders	RobG	12/01/04 05:14 PM
Re: DO'S and DON'T for welders	Jonesy	12/01/04 05:31 PM
Re: DO'S and DON'T for welders	RobG	12/01/04 05:53 PM
Re: DO'S and DON'T for welders	pplotz	12/01/04 06:03 PM
Re: DO'S and DON'T for welders	kobyhud	12/01/04 06:53 PM
Re: DO'S and DON'T for welders	Chris Perosi	12/01/04 07:29 PM
Re: DO'S and DON'T for welders	Sammy	12/01/04 07:30 PM
Re: DO'S and DON'T for welders	RobG	12/01/04 07:41 PM
Re: DO'S and DON'T for welders	RobG	12/01/04 07:36 PM
Re: DO'S and DON'T for welders	Anonymous	11/30/04 08:47 PM
Re: DO'S and DON'T for welders	Anonymous	12/01/04 08:22 PM
Re: DO'S and DON'T for welders	kobyhud	12/01/04 08:50 PM
Re: DO'S and DON'T for welders	Anonymous	12/01/04 09:19 PM
Re: DO'S and DON'T for welders	OffRodEO	12/01/04 10:42 PM
Re: DO'S and DON'T for welders	Jonesy	12/01/04 11:09 PM
Re: DO'S and DON'T for welders	OffRodEO	12/01/04 11:44 PM
Re: DO'S and DON'T for welders	Paddler	12/02/04 12:50 AM
Re: DO'S and DON'T for welders	pplotz	12/02/04 06:57 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.520s Queries: 16 (3.517s) Memory: 0.7252 MB (Peak: 0.7706 MB) Data Comp: Off Server Time: 2026-06-10 09:49:45 UTC
Valid HTML 5 and Valid CSS