DO'S and DON'T for welders

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: DO'S and DON'T for welders #529335 11/29/04 11:48 PM

Joined: Sep 2003

Posts: 893

taylorsville, utah

OffRodEO

Rock Warrior

So everyone suggest a 220 volt. That would need a special connection and bill from utah power right?(how much?) Is that the same outlet as the washer and/or dryer uses? Ill be renting a house for a while and dont want to pay the extra for the connection when ill be leaving it there.

kevan

93 rodeo,3.2 manual, limo tint, nice sound system,keyless entry and a killer alarm, drop in K&N, 3 inch DOR lift, 32-11.50 BFG MT's, warn hubs zutah.com wheeler
WELLS FARGO BANK WILL RIP YOU OFF!GET OUT WHILE YOU CAN

Entire Thread
Subject	Posted By	Posted
DO'S and DON'T for welders	OffRodEO	11/22/04 08:07 PM
Re: DO'S and DON'T for welders	matthew	11/22/04 10:25 PM
Re: DO'S and DON'T for welders	Bigpoppax2	11/22/04 10:33 PM
Re: DO'S and DON'T for welders	RobG	11/22/04 10:40 PM
Re: DO'S and DON'T for welders	OffRodEO	11/22/04 11:32 PM
Re: DO'S and DON'T for welders	Bansil	11/22/04 11:27 PM
Re: DO'S and DON'T for welders	Bansil	11/22/04 11:50 PM
Re: DO'S and DON'T for welders	Bansil	11/22/04 11:52 PM
Re: DO'S and DON'T for welders	Starchild	11/23/04 12:21 AM
Re: DO'S and DON'T for welders	Paddler	11/23/04 04:06 PM
Re: DO'S and DON'T for welders	OffRodEO	11/23/04 04:14 PM
Re: DO'S and DON'T for welders	RobG	11/23/04 05:00 PM
Re: DO'S and DON'T for welders	Jonesy	11/23/04 06:27 PM
Re: DO'S and DON'T for welders	RobG	11/23/04 06:46 PM
Re: DO'S and DON'T for welders	kobyhud	11/23/04 07:17 PM
Re: DO'S and DON'T for welders	OffRodEO	11/23/04 08:04 PM
Re: DO'S and DON'T for welders	RobG	11/23/04 08:39 PM
Re: DO'S and DON'T for welders	Chris Perosi	11/23/04 08:50 PM
Re: DO'S and DON'T for welders	ShowMeDave	11/23/04 09:44 PM
Re: DO'S and DON'T for welders	Paddler	11/23/04 10:15 PM
Re: DO'S and DON'T for welders	RobG	11/23/04 10:28 PM
Re: DO'S and DON'T for welders	kobyhud	11/23/04 11:06 PM
Re: DO'S and DON'T for welders	ZooMigo	11/25/04 05:09 PM
Re: DO'S and DON'T for welders	Anonymous	11/26/04 07:23 PM
Re: DO'S and DON'T for welders	Curtis Johnson	11/26/04 08:24 PM
Re: DO'S and DON'T for welders	OffRodEO	12/13/04 08:58 PM
Re: DO'S and DON'T for welders	Chris Perosi	12/15/04 09:53 PM
Re: DO'S and DON'T for welders	Anonymous	11/29/04 10:17 PM
Re: DO'S and DON'T for welders	OffRodEO	11/29/04 11:48 PM
Re: DO'S and DON'T for welders	kobyhud	11/30/04 12:15 AM
Re: DO'S and DON'T for welders	Paddler	11/30/04 02:46 PM
Re: DO'S and DON'T for welders	RobG	11/30/04 03:13 PM
Re: DO'S and DON'T for welders	Anonymous	11/30/04 08:02 PM
Re: DO'S and DON'T for welders	OffRodEO	11/30/04 08:15 PM
Re: DO'S and DON'T for welders	mlclark	11/30/04 08:20 PM
Re: DO'S and DON'T for welders	OffRodEO	11/30/04 08:37 PM
Re: DO'S and DON'T for welders	Jonesy	11/30/04 09:20 PM
Re: DO'S and DON'T for welders	mlclark	11/30/04 09:45 PM
Re: DO'S and DON'T for welders	RobG	11/30/04 09:54 PM
Re: DO'S and DON'T for welders	Anonymous	11/30/04 10:10 PM
Re: DO'S and DON'T for welders	Paddler	11/30/04 10:13 PM
Re: DO'S and DON'T for welders	OffRodEO	12/01/04 05:03 PM
Re: DO'S and DON'T for welders	RobG	12/01/04 05:14 PM
Re: DO'S and DON'T for welders	Jonesy	12/01/04 05:31 PM
Re: DO'S and DON'T for welders	RobG	12/01/04 05:53 PM
Re: DO'S and DON'T for welders	pplotz	12/01/04 06:03 PM
Re: DO'S and DON'T for welders	kobyhud	12/01/04 06:53 PM
Re: DO'S and DON'T for welders	Chris Perosi	12/01/04 07:29 PM
Re: DO'S and DON'T for welders	Sammy	12/01/04 07:30 PM
Re: DO'S and DON'T for welders	RobG	12/01/04 07:41 PM
Re: DO'S and DON'T for welders	RobG	12/01/04 07:36 PM
Re: DO'S and DON'T for welders	Anonymous	11/30/04 08:47 PM
Re: DO'S and DON'T for welders	Anonymous	12/01/04 08:22 PM
Re: DO'S and DON'T for welders	kobyhud	12/01/04 08:50 PM
Re: DO'S and DON'T for welders	Anonymous	12/01/04 09:19 PM
Re: DO'S and DON'T for welders	OffRodEO	12/01/04 10:42 PM
Re: DO'S and DON'T for welders	Jonesy	12/01/04 11:09 PM
Re: DO'S and DON'T for welders	OffRodEO	12/01/04 11:44 PM
Re: DO'S and DON'T for welders	Paddler	12/02/04 12:50 AM
Re: DO'S and DON'T for welders	pplotz	12/02/04 06:57 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.493s Queries: 15 (3.491s) Memory: 0.7269 MB (Peak: 0.7707 MB) Data Comp: Off Server Time: 2026-06-12 02:10:41 UTC
Valid HTML 5 and Valid CSS