Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: 2.6 webber swap. [Re: tkal] #529931 11/26/04 06:12 PM
Joined: Apr 2004
Posts: 1,494
B
BobShaw Offline
Body Damage is Cool
I'd go for the rear cam plug. It can be sealed externally with some kind of gunk. <img src="/forums/images/graemlins/lol.gif" alt="" />
Bob Shaw.


87 Raizer, 4.3V6, Mod TH700R4,231CHD, detroit rear and LSD front, bouncy seats, 2" lift and 32x15 BFG MT tires.
Re: 2.6 webber swap. [Re: tkal] #529932 11/26/04 11:29 PM
Joined: Jun 2004
Posts: 1,904
W
wyleone Offline
Body Damage is Cool
I almost guaratee that you cannot get that weber (32-36DGV) to pass basic emmisions, Weber tried it and rated this one an "For Off Road Use Only" Because you would basically erase any benifit to having it on your engine if you did get it in standards. I can't tell you what mine performed like w/ the factory carb as it was trashed by the previous owner when I got it. I saw the box of parts and that he use a Vice Grip to dismantle it and got my weber. I am very happy w/ the performance. And the simplicity. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Re: 2.6 webber swap. [Re: DanWheeler] #529933 11/26/04 11:31 PM
Joined: Jun 2004
Posts: 1,904
W
wyleone Offline
Body Damage is Cool
Quote
Once you switch to the weber you have NO protection against water inhalation unless you buy some extra parts and do some jury-rigging


Here are some non jury rigging adapters to water proof your weber.
K & N racing

<img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" />

Page 2 of 2 1 2







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.009s Queries: 16 (0.006s) Memory: 0.5974 MB (Peak: 0.6674 MB) Data Comp: Off Server Time: 2026-11-16 10:52:10 UTC
Valid HTML 5 and Valid CSS