Rusted floor board ?'s

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rusted floor board ?'s [Re: ecowheeler] #531395 11/29/04 10:46 PM

Joined: Jul 2003

Posts: 754

maine

mainer

Rock Warrior

i just use some thin sheet metal bent it all to fit in... riveted it in..

then put ice&water shield over it... black sticky rubber stuff

worked awesome

00 tacoma 4x4 ex-cab stock 193,000 and counting

85 long bed pickup 4x4 frame off restoration. rear lock rite 31's 268,000 miles

51 cj3a stock everything orginal 2500 original miles

Entire Thread
Subject	Posted By	Posted
Rusted floor board ?'s	Anonymous	11/29/04 08:07 AM
Re: Rusted floor board ?'s	Anonymous	11/29/04 02:53 PM
Re: Rusted floor board ?'s	ecowheeler	11/29/04 05:56 PM
Re: Rusted floor board ?'s	mainer	11/29/04 10:46 PM
Re: Rusted floor board ?'s	Anonymous	11/30/04 06:32 AM
Re: Rusted floor board ?'s	Anonymous	11/30/04 06:52 AM
Re: Rusted floor board ?'s	Toy Story	11/30/04 08:36 AM
Re: Rusted floor board ?'s	Anonymous	12/01/04 06:34 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.896s Queries: 16 (3.490s) Memory: 0.6061 MB (Peak: 0.6391 MB) Data Comp: Off Server Time: 2026-06-18 05:18:02 UTC
Valid HTML 5 and Valid CSS