Rusted floor board ?'s

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rusted floor board ?'s #531397 11/30/04 06:52 AM

Anonymous

Unregistered

If you have a welder, 4 1/2" grinder, or sawzall and money is tight, you can always put to good use an old tailgate thats collecting dust, and its legal to <img src="/forums/images/graemlins/kewl.gif" alt="" />

FLIPFLOP

Entire Thread
Subject	Posted By	Posted
Rusted floor board ?'s	Anonymous	11/29/04 08:07 AM
Re: Rusted floor board ?'s	Anonymous	11/29/04 02:53 PM
Re: Rusted floor board ?'s	ecowheeler	11/29/04 05:56 PM
Re: Rusted floor board ?'s	mainer	11/29/04 10:46 PM
Re: Rusted floor board ?'s	Anonymous	11/30/04 06:32 AM
Re: Rusted floor board ?'s	Anonymous	11/30/04 06:52 AM
Re: Rusted floor board ?'s	Toy Story	11/30/04 08:36 AM
Re: Rusted floor board ?'s	Anonymous	12/01/04 06:34 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.357s Queries: 15 (6.355s) Memory: 0.6037 MB (Peak: 0.6366 MB) Data Comp: Off Server Time: 2026-06-12 17:42:10 UTC
Valid HTML 5 and Valid CSS