Question on lift kits

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Question on lift kits #531569 11/29/04 08:00 PM

Joined: May 2003

Posts: 20

Philadelphia, PA

Flouris

Need a Spot

I want to lift my 95 YJ about 2 to 2.5". At what size lift do i have to start worrying about driveshaft angles? What about a dropped pitman arm, relocating break lines, and dropping the T-case? Does that need to be done for the size of suspension lift i am looking into? Any help would be great...thanks.

'95 Wrangler, 4.0L, Rock-it Air Intake, tornado, Performance Distributors Ignition kit, 31's, 2.5" Pro Comp Suspension lift, Hella fogs, Light Bar

Re: Question on lift kits [Re: Flouris] #531570 11/30/04 07:14 AM

Anonymous

Unregistered

a 2.5" lift is about the max you can go with stock stuff. if you go much more you will want dropped pitman arm brake lines.... ETC.

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 1.179s Queries: 15 (0.004s) Memory: 0.5840 MB (Peak: 0.6331 MB) Data Comp: Off Server Time: 2026-06-17 17:52:29 UTC
Valid HTML 5 and Valid CSS