Noisy lifters after new ring and bearing job

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Noisy lifters after new ring and bearing job #533472 12/03/04 11:03 PM

Joined: Jun 2003

Posts: 3,576

1800 acre island at the Oregon...

engnbldr

Roll Me Over

[quote]Old trick..........disassemble rocker shafts.....rotate shafts 180 degrees and reinstall. May have to drill/tap holes for lock screws.

>>>*....Uhhhh.....(*I wouldn't do that if I were you, look at where the oil holes are....).. .*EB

*Beats the he** outa me!....*LOL**...

Entire Thread
Subject	Posted By	Posted
Noisy lifters after new ring and bearing job	GeriatricToy	12/03/04 01:40 PM
Re: Noisy lifters after new ring and bearing job	Anonymous	12/03/04 02:36 PM
Re: Noisy lifters after new ring and bearing job	GeriatricToy	12/03/04 03:10 PM
Re: Noisy lifters after new ring and bearing job	Stan_Marshall	12/03/04 05:24 PM
Re: Noisy lifters after new ring and bearing job	GeriatricToy	12/03/04 05:44 PM
Re: Noisy lifters after new ring and bearing job	Anonymous	12/03/04 05:10 PM
Re: Noisy lifters after new ring and bearing job	engnbldr	12/03/04 05:56 PM
Re: Noisy lifters after new ring and bearing job	Stan_Marshall	12/03/04 06:22 PM
Re: Noisy lifters after new ring and bearing job	GeriatricToy	12/03/04 06:22 PM
Re: Noisy lifters after new ring and bearing job	solarcrew	12/03/04 07:23 PM
Re: Noisy lifters after new ring and bearing job	GeriatricToy	12/03/04 07:29 PM
Re: Noisy lifters after new ring and bearing job	Esquire812	12/03/04 08:30 PM
Re: Noisy lifters after new ring and bearing job	GeriatricToy	12/03/04 09:12 PM
Re: Noisy lifters after new ring and bearing job	Anonymous	12/03/04 09:33 PM
Re: Noisy lifters after new ring and bearing job	Anonymous	12/03/04 09:36 PM
Re: Noisy lifters after new ring and bearing job	Stan_Marshall	12/03/04 10:27 PM
Re: Noisy lifters after new ring and bearing job	GeriatricToy	12/03/04 10:51 PM
Re: Noisy lifters after new ring and bearing job	engnbldr	12/03/04 11:03 PM
Re: Noisy lifters after new ring and bearing job	Esquire812	12/03/04 11:40 PM
Re: Noisy lifters after new ring and bearing job	GeriatricToy	12/04/04 01:53 AM
Re: Noisy lifters after new ring and bearing job	Anonymous	12/04/04 03:29 AM
Re: Noisy lifters after new ring and bearing job	engnbldr	12/04/04 04:21 AM
Re: Noisy lifters after new ring and bearing job	Anonymous	12/04/04 10:49 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.494s Queries: 15 (3.491s) Memory: 0.6427 MB (Peak: 0.6763 MB) Data Comp: Off Server Time: 2026-06-18 11:09:41 UTC
Valid HTML 5 and Valid CSS