well i disconnected 4 bolts holding the lower bal joint to the a-arm so nothing is connected to the lower a arm anymore. i even took the steering arm off but that didnt help. if i used a pry bar where would i pry at? cuz it seems like it would be kinda awkward. i actually got the bolt through on the right front but then the 3 bolt holes wouldnt line up to bolt the spacer to the coil bucket because it was slightly twisted. i goe pissed and hit it real hard with a rubber mallet and it helped a little but not much. sigh. if only i was old enough for a nice cold beer....... <img src="/forums/images/graemlins/cheers.gif" alt="" />