Custom 10 leaf Deaver Springs install

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Custom 10 leaf Deaver Springs install #534230 12/06/04 03:53 PM

Joined: Dec 2003

Posts: 70

Arizona

expeditionswest Offline

Getting the Wheeling Fever

actually the lift varies a little depending on load. With only the static load in the back (things I do not remove like the 117# bumper, 90# tire, 48# jack, aux. fuel tank, etc.) it sits at about 2 3/4". When I have the aux fuel tank full and all of the other gear back there the lift comes in at a 2".

Oh, and I have a log of all of the height measurements. From stock to the current configuration.

Scott Brady
Jeep Wrangler Overland | J8 | Discovery I | G-Wagen | KTM 950

Entire Thread
Subject	Posted By	Posted
Custom 10 leaf Deaver Springs install	expeditionswest	12/05/04 05:06 PM
Re: Custom 10 leaf Deaver Springs install	Anonymous	12/06/04 08:51 AM
Re: Custom 10 leaf Deaver Springs install	expeditionswest	12/06/04 03:53 PM

Moderated by 4x4Wire, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 9.234s Queries: 15 (5.479s) Memory: 0.5964 MB (Peak: 0.6294 MB) Data Comp: Off Server Time: 2026-06-20 20:18:56 UTC
Valid HTML 5 and Valid CSS