Wrist pin bushing replacement

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Wrist pin bushing replacement [Re: hazman] #534263 12/06/04 02:42 AM

Joined: Oct 2003

Posts: 312

Pac Northwest

MrWiretender Offline

Mudrunner

Like EB said... a job best left to machine shop. I had them resize rods and assemble EB's bushings, pins and pistons. For my money, it's too dang much work and expense not to use pro with proper equipment and experience at this stage.

'87 22RE

Entire Thread
Subject	Posted By	Posted
Wrist pin bushing replacement	hazman	12/05/04 08:50 PM
Re: Wrist pin bushing replacement	Esquire812	12/05/04 09:00 PM
Re: Wrist pin bushing replacement	engnbldr	12/05/04 11:30 PM
Re: Wrist pin bushing replacement	kyle-22r	12/05/04 11:47 PM
Re: Wrist pin bushing replacement	MrWiretender	12/06/04 02:42 AM
Re: Wrist pin bushing replacement	OOP'S	12/06/04 02:51 AM
Re: Wrist pin bushing replacement	hazman	12/06/04 03:33 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.525s Queries: 16 (3.523s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-06-23 13:12:58 UTC
Valid HTML 5 and Valid CSS