Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
engine swap #536881 12/11/04 04:58 PM
Joined: Apr 2004
Posts: 3
S
sapper12 Offline OP
Need a Spot
Does anyone know if a 3.4L with headders will fit in a 94 pickup 4x4. Nothing wrong with my 3.0L, but when she goes it would be nice to upgrade.


Thanks

Re: engine swap [Re: sapper12] #536882 12/11/04 06:03 PM
Joined: Mar 2004
Posts: 656
CORunner93 Offline
Rock Warrior
Like a glove.....I did the swap using Downey headers this past spring. Search the archives, there's a bunch of info on here and look at the Offroad Solutions Website. They have a write-up on the swap....they also specialize in doing it.


'93 4Runner - 3.4L 5VZ-FE, 2" body lift, on-board-air system, custom gauge cluster, rear e-locker, electric fan, custom built front and rear bumpers, sliders, 4,88 gears...all on 33x12.5's.

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5862 MB (Peak: 0.6340 MB) Data Comp: Off Server Time: 2026-06-21 11:07:28 UTC
Valid HTML 5 and Valid CSS