Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
question about replacing engine mounts........ #538694 12/15/04 07:57 PM
Joined: Dec 2002
Posts: 77
gcinque Offline OP
Getting the Wheeling Fever
Is there anything I need to give special condsideration to when replacing the engine mounts on my truck. I will replacing the right,left and transmission mounts. It looks like a simple install in the manual.

thanks for any input! <img src="/forums/images/graemlins/cheers.gif" alt="" />


gcinque
03 Tacoma Xtra cab 4cyl 5spd
89 4Runner/Jasper reman 22RE/Auto SOLD
98 Tacoma Xtra cab 4cyl Auto SOLD
Re: question about replacing engine mounts........ [Re: gcinque] #538695 12/15/04 08:09 PM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****
Unbolt the mounts, jack up the engine (floor or bottle jack with a block of wood under the oil pan) or tranny, remove old mounts, install new ones, drop engine/tranny and bolt them back down. Good time to add a chain to themotor mounts to keep them from ripping apart in the future.


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.004s) Memory: 0.5877 MB (Peak: 0.6356 MB) Data Comp: Off Server Time: 2026-06-10 12:02:52 UTC
Valid HTML 5 and Valid CSS