[/quote] You sure its the tranny? Tcase in neutral, it rolls. So far, so good, expected if tranny. But clutch in, it rolls? Doesn't sound like tranny after all. Something binding up in your clutch? Bellhousing goofed up? I'm guessing here. Or is it possible you misspoke about it rolling with the clutch in? Will it shift with the motor off? Or is it still locked up? If it will shift with the motor off, but not with it running, it doesn't quite sound like the slam dunk it sounded like before. It may still be the tranny, but....
BTW, don't force it. My R151 for the article had been forced, it cost me an extra hundred dollars or so for the shift fork. Expensive little act of desperation on the part of the previous owner. [/quote]
I'm gonna go double check if it'll roll w/clutch in... It does not shift EVER...
I suspected the driver forced shifter in wrong direction when problem first occurred. He hasn't driven much and he just got done driving my F-350 diesel 6spd, the toyota shifter only moves a fraction of the 6spd travel.
I took shifter off trans and tried to manually push/pull out of gear, its stuck... not that I had much leverage to move anything. Now it seems I can't get the shifter lined up right. It's flopping around everywhere... Could a shift fork have been bent to cause this whole problem? This tranny got a lot of new parts at rebuild and I have a lot of faith in the rebuilder.
Thanks for the input so far <img src="/forums/images/graemlins/pfft.gif" alt="" />
1984 4Runner - V6 rear axle (locked by Lincoln), header, plenty of body cancer! Waiting for install: x-over steering, dual 'cases, twin-stick, 3" body & drivetrain lift, rear springs up front Still need: rear springs, 35" MT's, bumpers/sliders 2001 F350 - 7.3 110k miles on WVO conversion now!
|