Interesting Idea.....

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Interesting Idea..... [Re: OOP'S] #547555 01/05/05 03:23 AM

Joined: Oct 2003

Posts: 116

N39 32.872 W104 58.755

Seldom_Seen Offline

Wheeler

Yea ... noticed that too, The caption for that pic says it's the valve stem from the tubeless tyre. It could be replaced w/ a regular one.

This pic shows the valve stem for the bead lock:

[Linked Image]

You can see that it's a ridged stem as well, but it's set much further back.

Jake.

Entire Thread
Subject	Posted By	Posted
Interesting Idea.....	Seldom_Seen	01/05/05 12:07 AM
Re: Interesting Idea.....	TexJeff87	01/05/05 12:21 AM
Re: Interesting Idea.....	abnormaltoy	01/05/05 01:02 AM
Re: Interesting Idea.....	TexJeff87	01/05/05 02:09 PM
Re: Interesting Idea.....	Snowtoy	01/05/05 01:11 AM
Re: Interesting Idea.....	Seldom_Seen	01/05/05 01:23 AM
Re: Interesting Idea.....	Snowtoy	01/06/05 10:29 AM
Re: Interesting Idea.....	OOP'S	01/05/05 02:35 AM
Re: Interesting Idea.....	Seldom_Seen	01/05/05 03:23 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.769s Queries: 16 (3.495s) Memory: 0.6103 MB (Peak: 0.6432 MB) Data Comp: Off Server Time: 2026-06-17 01:06:21 UTC
Valid HTML 5 and Valid CSS