Exhaust routing with 2.5-inch tubing

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Exhaust routing with 2.5-inch tubing #547729 01/05/05 10:15 PM

Joined: Feb 2001

Posts: 402

Folsom, CA

whitetoy

Mudrunner

Thanx for the response, Thief.
That hose sounds perfect, but a bit pricier than
I am willing to go, for something used rarely.
Dryer hose, is too big and awkward to attach
to the exhuast, but I may try that anyway.
Thanx for the tip about MCMASTERS

Rick
1984 4Runner

Entire Thread
Subject	Posted By	Posted
Exhaust routing with 2.5-inch tubing	whitetoy	01/05/05 04:53 AM
Post deleted by little_joe	Anonymous	01/05/05 05:45 AM
Re: Exhaust routing with 2.5-inch tubing	whitetoy	01/05/05 10:15 PM
Post deleted by little_joe	Anonymous	01/06/05 03:40 AM
Re: Exhaust routing with 2.5-inch tubing	Anonymous	01/06/05 03:43 AM
Re: Exhaust routing with 2.5-inch tubing	Anonymous	01/07/05 10:13 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.055s Queries: 15 (4.052s) Memory: 0.6011 MB (Peak: 0.6340 MB) Data Comp: Off Server Time: 2026-11-05 11:00:23 UTC
Valid HTML 5 and Valid CSS