Clutch master cylinder question???????

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Clutch master cylinder question??????? [Re: swamp_man] #548820 01/09/05 01:50 AM

Joined: Apr 2000

Posts: 4,230

Roseville, CA, Gateway to the ...

OOP'S

Roll Me Over

It is going to put out enough pressure but is the volumn enough. If it were mine I would try it and if it does not work start looking for a bigger bore MC!!!!!

David Fritzsche
1990 Ex-Cab V-6,5-speed, with a few mods
04.5 CTD Dodge 2500 Ram--Tow Rig
Roseville, CA

"Serenity through Sobriety"

Entire Thread
Subject	Posted By	Posted
Clutch master cylinder question???????	swamp_man	01/07/05 05:36 AM
Re: Clutch master cylinder question???????	kyle-22r	01/07/05 07:17 AM
Re: Clutch master cylinder question???????	swamp_man	01/08/05 11:41 PM
Re: Clutch master cylinder question???????	OOP'S	01/09/05 01:50 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.484s Queries: 16 (3.482s) Memory: 0.5988 MB (Peak: 0.6318 MB) Data Comp: Off Server Time: 2026-06-03 20:20:32 UTC
Valid HTML 5 and Valid CSS