|
|
|
|
 22RE Timing Chain Diagnosis Tips
#548862
01/07/05 08:52 AM
|
Joined: Nov 2002
Posts: 23
OP
Need a Spot
|
Engine has approximately 50K on it since a rebuild. Not sure how well it was rebuilt..... At start up it makes a noise like rod knock but it goes away after ~2-3 seconds - enough time to build oil pressure. The timing chain guides looked intact when I adjusted the valves approx. 10K ago. Any other ways to rule out (or in) the timing chain guides/tensioner/chain w/o taking off the valve cover?
Brian
|
|
|
Re: 22RE Timing Chain Diagnosis Tips
[Re: NVR FNSH]
#548863
01/07/05 02:03 PM
|
|
Anonymous
Unregistered
|
Put a timing light on it and see if it jumps around at idle or is smooth and steady.
It's worth a look under the valve cover when you consider what a broken chain might cause.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5842 MB (Peak: 0.6334 MB) Data Comp: Off Server Time: 2026-06-07 09:23:40 UTCValid HTML 5 and Valid CSS 
