Idler arm

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Idler arm #54899 06/09/03 04:22 PM

Joined: Mar 2001

Posts: 116

Victor,NY

Zach

Wheeler

Argh, I went to replace the bushings and the seal on my idler arm yesterday and when I got it apart I noticed that the shaft was bent! I put the new bushing on the bottom and the new seal but I had to put the old bushing back on top because the new on wouldn't go on...ARGH!! Oh well, I'll start calling the yards this afternoon.

zach

'88 4Runner SR5, SAS'd, 2" body, 33 TRXUS MT's
'96 FZJ 80

Entire Thread
Subject	Posted By	Posted
Idler arm	Zach	06/09/03 04:22 PM
Re: Idler arm	anthony1	06/09/03 04:58 PM
Re: Idler arm	Lou Bell	06/09/03 06:30 PM
Re: Idler arm	Wyatt	06/09/03 07:07 PM
Re: Idler arm	Zach	06/09/03 07:08 PM
Re: Idler arm	Terry4X4	06/09/03 09:23 PM
Re: Idler arm	DRTDEVL	06/10/03 12:37 AM
Re: Idler arm	James Chow	06/10/03 06:05 PM
Re: Idler arm	adam	06/10/03 09:39 PM
Re: Idler arm	Anonymous	06/10/03 09:43 PM
Re: Idler arm	DRTDEVL	06/10/03 09:57 PM
Re: Idler arm	adam	06/10/03 10:53 PM
Re: Idler arm	Wyatt	06/11/03 01:37 AM
Re: Idler arm	Anonymous	06/11/03 04:12 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.385s Queries: 15 (4.382s) Memory: 0.6201 MB (Peak: 0.6531 MB) Data Comp: Off Server Time: 2026-06-08 19:18:33 UTC
Valid HTML 5 and Valid CSS