2.3 Engine Swap (Pup)

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

2.3 Engine Swap (Pup) #550888 01/12/05 12:02 AM

Joined: Jan 2005

Posts: 19

mph9111

Need a Spot

Got a rod knocking in my '92 and found a '94 with less miles on it to exchange with. The '94 has the fuel injection setup on it.

I want to know if I can simply remove the Fuel Inj. system on the '94 motor and put my carb setup on it? Had my carb redone last year and it is perfect.

Should I consider keeping the FI system? Advantages? Need new CPU/Wiring/high pressure fuel pump?

Regards, mph9111

Entire Thread
Subject	Posted By	Posted
2.3 Engine Swap (Pup)	mph9111	01/12/05 12:02 AM
Re: 2.3 Engine Swap (Pup)	randii	01/12/05 01:22 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.479s Queries: 15 (3.477s) Memory: 0.5940 MB (Peak: 0.6269 MB) Data Comp: Off Server Time: 2026-05-31 03:08:01 UTC
Valid HTML 5 and Valid CSS