Quote
What happened to the picture?

They Are still there for me?
Quote
How much guessing, do you cut out to fit them?

There will be no guessing. You don't have to cut nothing to put the flairs on your trooper. It will just show some of your inner frender. I will try to take somemore pictures to explain that to you.
Quote
How thick are they? Thick enough to take a rock being thrown by a mud terrain tire and not break?

This is where I belive people have their doubts about fiberglass. I made the set you see on my trooper out of 1 layer of 2oz mat and on the flange where it bolts up is 3 layers of 2oz. That is so it would be strong anouth to hold. But they will give alittle on the outside.Make sence?
Quote
Joe, if you'll look at the last photo again - Inside of the fender flare, you'll see the heads of what look to me like a couple of hex-head sheet metal screws.

Good job Smiley however I used 1/4 inch bolts on mine. The front you could get away with pop rivets but the back would be hard to fit the pop rivet gun in there to use it.
Quote
I hope these things really catch-onà Maybe then Daniel can whip-up some for the Rodeos & Amigii too

Ditto That <img src="/forums/images/graemlins/cyclops.gif" alt="" />

Later,
Daniel

"Thanks for the joy that you gave to me"