So, Just how hard would it be to put in a 2.7 Taco motor?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: So, Just how hard would it be to put in a 2.7 Taco motor? [Re: speeedracer] #552029 01/14/05 01:55 AM

Joined: Feb 2001

Posts: 3,935

Minnesota

bkg

Roll Me Over

Marlin's son Mike has done it. See his thread here...

Mike mentioned that they would likely start working on a kit this year - after he does the same swap on Marlin's truck...

Brian K. Gallus
I have nothing important to say.

Entire Thread
Subject	Posted By	Posted
So, Just how hard would it be to put in a 2.7 Taco motor?	speeedracer	01/14/05 01:06 AM
Re: So, Just how hard would it be to put in a 2.7 Taco motor?	bkg	01/14/05 01:55 AM
Re: So, Just how hard would it be to put in a 2.7 Taco motor?	kyle-22r	01/14/05 04:19 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.486s Queries: 16 (3.485s) Memory: 0.5968 MB (Peak: 0.6298 MB) Data Comp: Off Server Time: 2026-06-11 11:29:13 UTC
Valid HTML 5 and Valid CSS