|
|
|
|
 Isuzu Intake Swap
#552398
01/14/05 10:13 PM
|
Joined: Jan 2005
Posts: 19
OP
Need a Spot
|
Anyone tried this already? I want to put a '92 2.3 carb intake on a '94 F/I 2.3 engine. Does anyone know if the intake ports are the same?
Regards, mph9111
|
|
|
Re: Isuzu Intake Swap
[Re: mph9111]
#552399
01/15/05 08:09 PM
|
Joined: Dec 2001
Posts: 2,652
Roll Me Over
|
Welcome to the board!
I recomend using the "Search" button up on the top. Restrict your search to the three relevant Isuzu boards (Archive, Talk, Tech)
Intake swaps have been done before and while your exact one may not have, there is a lot of good information.
[color:"white"]? 04 Rodeo DI ?[/color] 75k mi, body damage on the 1st weekend I got it.
|
|
|
Re: Isuzu Intake Swap
[Re: mph9111]
#552400
01/16/05 03:27 AM
|
Joined: Sep 2003
Posts: 1,214
Body Damage is Cool
|
everything bolts right up , just use your old dist, and add an electric fuel pump and it will work just fine JERRY
|
|
|
Re: Isuzu Intake Swap
[Re: JLEMOND]
#552401
01/18/05 11:35 PM
|
Joined: Jan 2005
Posts: 19
OP
Need a Spot
|
|
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5981 MB (Peak: 0.6533 MB) Data Comp: Off Server Time: 2026-05-30 02:10:45 UTCValid HTML 5 and Valid CSS