Rebuilding a power steering box

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Rebuilding a power steering box #554300 01/19/05 12:34 AM

Joined: Jun 2003

Posts: 442

Provo, Utah

kobyhud

Mudrunner

My box is leaking like a sieve, I imagine that I need to rebuild it one way or another.

How would I go about doing this?

95 Rodeo LS, Auto, SAS, , 60 front, 14 bolt rear. 5.13 r&p, Hydro-Assist, teras..
http://www.pieceofhud.com/gallery

Entire Thread
Subject	Posted By	Posted
Rebuilding a power steering box	kobyhud	01/19/05 12:34 AM
Re: Rebuilding a power steering box	sweater	01/19/05 01:00 AM
Re: Rebuilding a power steering box	houlster	01/19/05 03:47 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.570s Queries: 15 (3.568s) Memory: 0.5964 MB (Peak: 0.6294 MB) Data Comp: Off Server Time: 2026-06-18 06:44:14 UTC
Valid HTML 5 and Valid CSS