Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Rebuilding a power steering box #554300 01/19/05 12:34 AM
Joined: Jun 2003
Posts: 442
kobyhud Offline OP
Mudrunner
My box is leaking like a sieve, I imagine that I need to rebuild it one way or another.

How would I go about doing this?


95 Rodeo LS, Auto, SAS, , 60 front, 14 bolt rear. 5.13 r&p, Hydro-Assist, teras..
http://www.pieceofhud.com/gallery
Re: Rebuilding a power steering box [Re: kobyhud] #554301 01/19/05 01:00 AM
Joined: Jun 2001
Posts: 1,365
sweater Offline
Body Damage is Cool
Replaced mine for $75 with one from the junk yard. Held up super fine.

Just another option. <img src="/forums/images/graemlins/smile.gif" alt="" />

Re: Rebuilding a power steering box [Re: sweater] #554302 01/19/05 03:47 AM
Joined: Dec 1999
Posts: 2,394
houlster Offline
Isuzu Moderator
Quote
Replaced mine for $75 with one from the junk yard. Held up super fine.


Ditto for mine, cept it was $50 including shipping smile BTW, the rebuild kit was around $85.

--Dan








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.005s) Memory: 0.5919 MB (Peak: 0.6459 MB) Data Comp: Off Server Time: 2026-06-17 15:14:26 UTC
Valid HTML 5 and Valid CSS