Removal of Dash Piece on 1st Gen Rodeo

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Removal of Dash Piece on 1st Gen Rodeo [Re: RodeoXS] #554598 01/19/05 07:12 PM

Joined: Aug 1999

Posts: 9,030

Fair Oaks, CA USA

randii

4x4Wire.com Managing Editor Emeritus

There's a post recently about the availability of a factory clock in this location.

IIRC, it clips in with built-in plastic spring-back fingers that have a little barb on their tips for retention. IIRC, I used a thin, broad, stiff tool to lever this panel out.

Randii

Randy Burleson
4x4Wire Managing Editor Emeritus
Mongrel Isuzu Amigo

Entire Thread
Subject	Posted By	Posted
Removal of Dash Piece on 1st Gen Rodeo	RodeoXS	01/19/05 05:11 PM
Re: Removal of Dash Piece on 1st Gen Rodeo	sweater	01/19/05 06:04 PM
Re: Removal of Dash Piece on 1st Gen Rodeo	randii	01/19/05 07:12 PM
Re: Removal of Dash Piece on 1st Gen Rodeo	RodeoXS	01/19/05 08:24 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.102s Queries: 16 (3.906s) Memory: 0.5989 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-07-15 08:29:13 UTC
Valid HTML 5 and Valid CSS