Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Can I lift my IFS 4X4 on a budget? #557523 01/25/05 08:02 AM
Joined: Jan 2005
Posts: 21
D
dailyDriver Offline OP
Need a Spot
I'm thinking about transformin' my daily-driver with a little lift to fit bigger rubber, maybe 2-3". Now I'm running 31" ATs on stock suspension. Its a '94 and cursed with an independent front end. Is there a way to get it on 33's without breaking the bank?


DailyDriver: '94 Xcab 4x4, 22RE, 139K miles, STOCK
Re: Can I lift my IFS 4X4 on a budget? [Re: dailyDriver] #557524 01/25/05 08:33 AM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****
I have some ideas and links on my web page:
http://www.4Crawler.com/4x4/ForSale/BodyLiftKit.shtml#FAQ10

It is fairly easy and inexpensive to fit 33s on an IFS truck. Of course by the time you add in the cost of gears and other items, it is more, but getting the tires to fit is not bad.

Re: Can I lift my IFS 4X4 on a budget? [Re: 4Crawler] #557525 01/25/05 02:48 PM
Joined: Feb 2004
Posts: 1,042
CraShYota Offline
Body Damage is Cool
2" body lift for about 150 - 200 bucks. that would be your cheapest and easyest lift option. Otherwise you gonna get to a 300 to 500 dollar range if you want more travel. you can do the ifs lift for prolly 250 if you know how to make stuff and can weld.


Welding and Fabrication Engineer
2003 taco V6 ext cab sr5
1988 Toyota Pickup V6(totaled)
Re: Can I lift my IFS 4X4 on a budget? [Re: dailyDriver] #557526 01/25/05 02:52 PM
Anonymous
Unregistered
I fit my 33x12.5 tires with a 2" lift pretty easily. The real way to go is suspension but for the price you can't beat a body lift. Check ebay I have seen many go from 75-100$$$.

Re: Can I lift my IFS 4X4 on a budget? #557527 01/25/05 03:29 PM
Joined: Sep 2004
Posts: 1,015
ChrisH Offline
Body Damage is Cool
I got my 3" BL off ebay for 60 bucks shipped. It's a Warn body lift, "black diamond" or w/e they have, and it came with all of the steering extension parts, radiator drop brackets, bumper brackets and everything.

Then the $119.00 from sdori.com for my ball joint spacers, 8 bucks shipped for a 1" steel block (ebay again), and $45 for a set of 4crawlers shackles. Roger also sells a much better quality body lift which, had I realized prior, I would have bought.

That's $232, call it 250 bucks (after hardware, pb blaster, band-aids) and I clear 34x10.50's and can't get them to rub.

-I tried a set of 35x10.50 TSL's on and they did rub in the rear after some flexing. The IFS doesn't flex so they didn't rub up front. <img src="/forums/images/graemlins/shiner.gif" alt="" />

<img src="/forums/images/graemlins/cheers.gif" alt="" /> -Chris


'95 Toyota Pickup DX Xtended Cab ~ Daily Driver
Re: Can I lift my IFS 4X4 on a budget? [Re: dailyDriver] #557528 01/26/05 01:59 AM
Joined: Jan 2004
Posts: 912
TheBandit Offline
Rock Warrior
You can find suspension lifts used for pretty cheap. Keep your eyes peeled for people doing solid axle swaps.


[color:"darkgreen"]1986 4Runner - 4" IFS - 63" Chevys - 33" ATs - 5.29s - Rear Detroit
Sliders - Kayline - Rebuilt 22RE - On Board Air AND Factory AC
www.xtremefabricator.com[/color]
Re: Can I lift my IFS 4X4 on a budget? [Re: TheBandit] #557529 01/26/05 02:22 AM
Joined: Feb 2004
Posts: 1,379
Scerb Offline
Body Damage is Cool
I think a 3" body trailmaster kit runs ~$80 at your local autparts store. That'll be more than enough to clear 33's, especially if you get offset rims.

-Scerb

Re: Can I lift my IFS 4X4 on a budget? [Re: dailyDriver] #557530 01/26/05 03:03 AM
Joined: May 2001
Posts: 6,768
Brian894X4 Offline
Trail Leader
*****
Here's what I ran years ago to clear 33s;

http://www.brian894x4.com/33INCHTIRES.html

However, if I ever get another IFS torsion bar truck, what I would do today, is run a set of 33x10.5-15 tires on stock offset rims, install rear extended shackles, and add 1.5" upper A-arm ball joint spacers.

That's the most minimal, but effective lift to clear 33s, gives a real increase in wheel travel, unlike bodylifts and it would look good, in my opinion.

Hmmm, maybe I should buy another IFS truck. <img src="/forums/images/graemlins/smile.gif" alt="" />


[color:"blue"]My Toyota/Expedition Website[/color]
Foreign & Military Toyotas - Expedition 4x4s
Our historical explorations & much more

Re: Can I lift my IFS 4X4 on a budget? [Re: Brian894X4] #557531 01/26/05 06:59 AM
Joined: Oct 2004
Posts: 1,270
willzrunna96 Offline
Body Damage is Cool
you can get a 3 inch Trail master body lift for 90 bucks from autozone. its comes with front bumper brackets and steering extension. or goto NTWonline and get a super lift suspension lift for 569 i believe 4wheelparts just started carring budget suspension lifts also for toyotas


91 pickup 5.29's US GEAR.35x 12.50 trxus m/t.5 speed swap- SOLD!
96 4Runna limited-toytec/OME lift,diff drop Nitto 285/75/16 Elocked=butter
07 FJ cruiser 3" DR coilovers 285/75/16 nitto TG. allpro sliders
Re: Can I lift my IFS 4X4 on a budget? [Re: willzrunna96] #557532 01/26/05 07:17 AM
Joined: Jun 2002
Posts: 330
Hecubus Offline
Mudrunner
Get a body lift from www.4crawler.com he's got my vote,
good stuff, great to work with and good prices.
Jed <img src="/forums/images/graemlins/cheers.gif" alt="" />


88 SR5 Toyota Pickup 22re,TRD cam 4" Pro-comp, crappy superlift 4" springs rear, 1" body lift, 1.5" BJ spacers, 35x12.5 PJ Dirt grips, no locker yet =( SAS in the works
Page 1 of 2 1 2

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.021s Queries: 16 (0.018s) Memory: 0.6389 MB (Peak: 0.7620 MB) Data Comp: Off Server Time: 2026-11-18 05:15:20 UTC
Valid HTML 5 and Valid CSS