Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: Can I lift my IFS 4X4 on a budget? [Re: dailyDriver] #557533 01/26/05 03:10 PM
Joined: Sep 2003
Posts: 256
trcdrunner Offline
Mudrunner
Just throwin my 02 out there... Now I'm all solid, so I dont know how much gains, and I'm sure others will chime in if I'm off... BUT <img src="/forums/images/graemlins/butwiggle.gif" alt="" /> Couldnt the T-Bars be cranked up, then either Shakles or A-A-L in the rear?? (possibly blocks <img src="/forums/images/graemlins/zombie.gif" alt="" /> if you want CHEAP, but I would go one of the other 2 mentioned).
Now of course cranked T-bars will limit travel, but he says its D-Driver.....???.... Again not sure if this will clear the 33's but it could be the easiest... if garage time is limited??? <img src="/forums/images/graemlins/lol.gif" alt="" />

Again just my 02 out there.....


aka FireNIce
84 Runner 33" Swamper LTB, 4.30's, Spool in Rear, Lock-Right soon in front exo-caged, 4" lift.
TRCD Toys Web Site
TRCD Toys Apperal
Re: Can I lift my IFS 4X4 on a budget? [Re: Brian894X4] #557534 01/26/05 06:14 PM
Anonymous
Unregistered
I am doing the same thing to my 86 runner. Ive got the shackles for the back and t-bar adjusted up but need a little more in the front. What are 1.5" upper A-arm ball joint spacers and where can I get them?

Re: Can I lift my IFS 4X4 on a budget? #557535 01/26/05 07:05 PM
Joined: Feb 2003
Posts: 242
88toy4x4 Offline
Wheeler
Ball joint spacers - CLICK

Re: Can I lift my IFS 4X4 on a budget? [Re: 88toy4x4] #557536 01/26/05 07:52 PM
Anonymous
Unregistered
Does anyone else make them? Has anyone got 5,000 miles on them yet? Just want to make sure they are safe and bugs worked out.

Re: Can I lift my IFS 4X4 on a budget? #557537 01/26/05 08:03 PM
Joined: Nov 2003
Posts: 827
A
allochris Offline
Rock Warrior
well, i have done close to 10000km since i last put those on last november or so... (almost all highway & steep ski hills roads) & i don't have any problem yet. <img src="/forums/images/graemlins/kewl.gif" alt="" />


91-22re(408xxxkm & counting with a rebuilt long block)- Flatbed/Camper
/33x10.5BFG-AT/Open 4:88/1.5"BJS/
+2"Shackles/Add-a-Leaf/AirLift/Dual-Batteries
Re: Can I lift my IFS 4X4 on a budget? #557538 01/26/05 08:04 PM
Joined: Mar 2001
Posts: 2,731
elripster Offline
Roll Me Over
I suggest going to www.4crawler.com for the spacers as well as other accessories.

I should probably add that I designed the spacers so if you have any questions feel free to post here or e-mail me at [email]sales@sdori.com.[/email]

As for mileage, I'm well over 5K miles. They are essentially a block of metal in compression so the design is very durable and low risk. In fact, it would take hundreds of thousands of pounds to crush them, far more than any part of the trucks's suspension could ever come remotely close to withstanding.

Frank


1994 4runner, 3.0, auto, 4.88's, 31's, BJ spacers, Coil spacers, air shocks, D-ring anchors, 4Crawler F/R swaybar discos.
www.sdori.com
Re: Can I lift my IFS 4X4 on a budget? [Re: elripster] #557539 01/27/05 01:13 AM
Joined: Nov 2002
Posts: 669
Rodgertheshrubber Offline
Rock Warrior
here is a pic of my truck on 35x12.5s with a 1" rb body lift and some cutting in the front, shackles and extra spring in the rear along with some very minor cutting.tires rubbed on the idler arm and the pitman arm at full turn, but it didn't make that much difference.no rub on anything else, though.

[Linked Image]

[Linked Image]


"I am a shrubber, my name is Rodger the Shrubber. I arrange, design, and sell shrubberies"
Re: Can I lift my IFS 4X4 on a budget? [Re: Rodgertheshrubber] #557540 01/27/05 05:06 AM
Joined: Nov 2002
Posts: 1,921
4
4xGeek Offline
Body Damage is Cool
I too can vouch for the 1.5" BJ spacer from SDORI... <img src="/forums/images/graemlins/kewl.gif" alt="" />

Same one even works on us bigger Toys - Linky w/pics... <img src="/forums/images/graemlins/cheers.gif" alt="" />


4xGeek (Chris)
'97 T-100 4wd sr5-suto, 3" BL, 1.5" BJ spacers, 35" ProComp AT's, 4.88's, Bilsteins x 6, etc...

No longer stuck in SoCal!! smile
Re: Can I lift my IFS 4X4 on a budget? #557541 01/28/05 09:50 AM
Joined: Jul 2003
Posts: 140
Myredyota Offline
Wheeler
I have probably close to 10,000 miles on mine. No problems! Lots of wheeling and lots of highway. If I ever buy another IFS Toy, these spacers will be the very first mod! 33" tires will fit fine with no T- Bar adjustment.


[color:"blue"]Carey[/color][b]
[b][color:"red"]89 SR5 Extended Cab 4X4 V6
[/color][color:"blue"]Don't forget to pay your taxes......

Millions of illegal aliens are depending on you!!![/color]
Page 2 of 2 1 2

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.014s Queries: 15 (0.010s) Memory: 0.6319 MB (Peak: 0.7471 MB) Data Comp: Off Server Time: 2026-11-18 05:16:16 UTC
Valid HTML 5 and Valid CSS