After Baja, I need some help

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: After Baja, I need some help [Re: Jim_Paget] #559662 01/28/05 06:50 AM

Joined: Dec 2001

Posts: 45

Chula Vista (San Diego area)

ChulaVistaDave Offline

Getting the Wheeling Fever

Thanks for the reply.

There is a bolt down bracket just above the hose to the cooler fittings. It split the tube between the bracket and the fittings. It looked as if the hose had jurked the tub down, bending it a little.

Thanks
Dave

Entire Thread
Subject	Posted By	Posted
After Baja, I need some help	ChulaVistaDave	01/28/05 06:11 AM
Re: After Baja, I need some help	Jim_Paget	01/28/05 06:34 AM
Re: After Baja, I need some help	ChulaVistaDave	01/28/05 06:50 AM
Re: After Baja, I need some help	Jim_Paget	01/28/05 03:39 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.621s Queries: 16 (3.619s) Memory: 0.5990 MB (Peak: 0.6320 MB) Data Comp: Off Server Time: 2026-06-20 04:10:32 UTC
Valid HTML 5 and Valid CSS