Buggered Hub rebuild

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Buggered Hub rebuild [Re: BrokeAsAJoke] #560495 01/30/05 06:54 PM

Joined: Jan 2001

Posts: 11,595

Cincinnati, OH

Adam F

Forum Moderator

Individual parts for the hubs are not available as far as I know. I've went top the dealer to try, but their parts diagram does not show any replaceable parts inside the hub.

You can get a 2 1/8" socket from Sears that will fit your 54mm nut just fine.

88 4R, 350 V8, R150 5 speed Sold <...uot; />
97 4R, stock, daily driver
98 Sienna, kid and dog hauler, wife's ride

Entire Thread
Subject	Posted By	Posted
Buggered Hub rebuild	BrokeAsAJoke	01/30/05 06:09 AM
Re: Buggered Hub rebuild	Adam F	01/30/05 06:54 PM
Re: Buggered Hub rebuild	BrokeAsAJoke	01/30/05 08:05 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.506s Queries: 16 (3.504s) Memory: 0.5971 MB (Peak: 0.6301 MB) Data Comp: Off Server Time: 2026-06-08 22:22:41 UTC
Valid HTML 5 and Valid CSS