Smittybuilt push bar

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Smittybuilt push bar #562869 02/04/05 04:45 AM

Joined: Oct 2003

Posts: 84

Valdosta, GA

toy94x4

Getting the Wheeling Fever

Does anyone know if a smittybuilt push bar off of a 94 4runner will fit onto my 94 p'up? I would think so, but you never know. Thanks in advance.

1994 P'up, 22RE, K&N, LCE exhaust sys (header, cat, muffler, 2.25" pipe), 1" RB seat lift, 1" RB body lift, 1.5" rear lift via shackles, Rancho 5000's, 33" Pro Comp M/T's, 4.88's w/ Aussie lockers front & back

Entire Thread
Subject	Posted By	Posted
Smittybuilt push bar	toy94x4	02/04/05 04:45 AM
Re: Smittybuilt push bar	Greg_Canada	02/04/05 05:42 AM
Re: Smittybuilt push bar	Red_Chili	02/04/05 04:16 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.492s Queries: 15 (3.490s) Memory: 0.5958 MB (Peak: 0.6288 MB) Data Comp: Off Server Time: 2026-06-14 18:21:37 UTC
Valid HTML 5 and Valid CSS