burping cooling system without making a mess

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: burping cooling system without making a mess [Re: Stan_Marshall] #564163 02/06/05 11:30 PM

Joined: Jun 2003

Posts: 1,250

Long Island

shawn p

Body Damage is Cool

on changing that bearing. I used a screwdriver gently against the side of the nut along with a hammer to tap tap tap it counterclockwise untill it came loose. I dont think this hurts anyting. But it makes a torque seting when you put it backtogether impossable.

2006 tacoma
SR5
4x4
V6 Auto

Entire Thread
Subject	Posted By	Posted
burping cooling system without making a mess	Stan_Marshall	02/06/05 11:23 PM
Re: burping cooling system without making a mess	shawn p	02/06/05 11:30 PM
Re: burping cooling system without making a mess	Adam F	02/07/05 01:25 AM
Re: burping cooling system without making a mess	Esquire812	02/07/05 02:38 AM
Re: burping cooling system without making a mess	Stan_Marshall	02/07/05 05:20 AM
Re: burping cooling system without making a mess	2utadud	02/07/05 07:24 AM
Re: burping cooling system without making a mess	94krawler	02/08/05 03:56 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 7.141s Queries: 16 (3.954s) Memory: 0.6061 MB (Peak: 0.6391 MB) Data Comp: Off Server Time: 2026-06-05 22:14:54 UTC
Valid HTML 5 and Valid CSS