My thoughts ed zacherie. And on the coolant burping...dont fill it up to the top of the tank Stan! Leave the coolant level down about 3/4" (half full) and when the t-stat opens and the cores come into view top it off full, replace the cap and drive it like it was stolen. As long as your overflow is at the proper level the rest will take care of itself. After your first drive, top off the resevoir as needed and dont worry about having to wipe up that sticky expensive mess.

~Darin <img src="/forums/images/graemlins/baby.gif" alt="" />

Or install a T in the top most part of the heater hose, thread cap on loosely and let it dance like a pressure cooker thingy that bounces around. When you get coolant starting to drio off the T tighten her down and top off the coolant reservoir. Very clean way to do it infact.