Valve guides seals 24V 3.0 SOHC

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Valve guides seals 24V 3.0 SOHC [Re: FrankR] #565134 02/09/05 02:13 AM

Joined: Feb 2005

Posts: 26

BMT213A

Getting the Wheeling Fever

Compression was an even 190-210 psi with the motor cold. That and the fact all 6 plugs look reasonably tanned made me rule out any "serious" motor issues.
As far as I can tell, its either PCV restrictions or valve guides seals. Either it appears would make the beast smoke after protracted idling.

Paul

Entire Thread
Subject	Posted By	Posted
Valve guides seals 24V 3.0 SOHC	BMT213A	02/08/05 04:32 AM
Re: Valve guides seals 24V 3.0 SOHC	rapha	02/08/05 06:09 AM
Re: Valve guides seals 24V 3.0 SOHC	FrankR	02/08/05 02:27 PM
Re: Valve guides seals 24V 3.0 SOHC	MontyMcV	02/08/05 05:17 PM
Re: Valve guides seals 24V 3.0 SOHC	BMT213A	02/08/05 06:50 PM
Re: Valve guides seals 24V 3.0 SOHC	FrankR	02/08/05 07:23 PM
Re: Valve guides seals 24V 3.0 SOHC	BMT213A	02/09/05 02:13 AM
Re: Valve guides seals 24V 3.0 SOHC	FrankR	02/09/05 02:33 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.538s Queries: 16 (3.535s) Memory: 0.6074 MB (Peak: 0.6404 MB) Data Comp: Off Server Time: 2026-06-20 09:26:04 UTC
Valid HTML 5 and Valid CSS