Good advice. You can also "gravity bleed" the system by cracking the bleed screws (one by one) and letting the fluid dribble out, taking the air with it. The only precaution with this method is to ensure that you keep the reservoir topped up, or air gets back in, and you have to start over. I put small vinyl tubing from the bleeder to a bottle, and get it started by cracking the rear bleed screw, and giving the pedal one pump. This starts the flow. Then watch that reservoir. Keep it flowing till you no longer see any air bubbles in the tubing as it runs out (did I mention clear tubing?). Then go to the front bleeders and repeat the process.

PHIL