Another driveshaft question....

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Another driveshaft question.... [Re: BrokeAsAJoke] #567726 02/13/05 06:27 PM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

I have some tips on my web page for troublshooting driveline problems. Sounds like perhaps the center bearing is worn out, maybe it was loose and the PO was trying to keep it from moving around too much. They can be replaced or see the Tech section for how to eliminate it.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
Another driveshaft question....	gcinque	02/13/05 04:26 PM
Re: Another driveshaft question....	4Crawler	02/13/05 05:32 PM
Re: Another driveshaft question....	BrokeAsAJoke	02/13/05 05:41 PM
Re: Another driveshaft question....	4Crawler	02/13/05 06:27 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.538s Queries: 16 (3.535s) Memory: 0.5988 MB (Peak: 0.6318 MB) Data Comp: Off Server Time: 2026-06-21 08:13:53 UTC
Valid HTML 5 and Valid CSS