|
|
Re: Leaky Diff
#56856
06/26/03 04:21 PM
|
Joined: Jan 2000
Posts: 539
OP
Rock Warrior
|
Well, for a quick fix I tried Joe's advice and bought some Hylomar and so far it is working. Yesterday morning before work I drained the rear diff and then let it drip dry while I was at work. When I got home I used some rubbing alcohol to clean the surface around the plug and threads. I applied the Hylomar around the lip of the threads and around the gasket of the plug. Filled the diff and took it for a test drive and there were no spots on the driveway this morning. <img border="0" title="" alt="[Cool]" src="images/icons/cool.gif" /> After reading some more and seeing various posts like this one: Shaved Rear Diff I'm convinced welding the diff is the long term solution.
Terry Johnson Gettin' Off 4X4 Club'89 XCab SR5 V6 - D60 Hybrid SAS, Ultimate Marlin Crawler, Detroit rear, ARB front '97 TJ - Atlas 3.8 Twin Stick, ARB F&R, custom rollcage
|
|
Re: Leaky Diff
#56857
06/28/03 02:26 AM
|
|
Anonymous
Unregistered
|
This might be a stupid question (hey, who's this Brink guy, anyway? <img border="0" title="" alt="[Razz]" src="images/icons/tongue.gif" /> ) but I've seen no mention of the crush washer for the drainplug...
|
|
Re: Leaky Diff
#56858
06/28/03 02:43 AM
|
Joined: Jan 2000
Posts: 539
OP
Rock Warrior
|
</font><blockquote><font size="1" face="Verdana, Tahoma, Arial, Helv, Helvetica, Sans">quote:</font><hr /><font size="2" face="Verdana, Tahoma, Arial, Helv, Helvetica, Sans">Originally posted by Jim Brink: <strong>This might be a stupid question (hey, who's this Brink guy, anyway? <img border="0" title="" alt="[Razz]" src="images/icons/tongue.gif" /> ) but I've seen no mention of the crush washer for the drainplug...</strong></font><hr /></blockquote><font size="2" face="Verdana, Tahoma, Arial, Helv, Helvetica, Sans">My, my, look who crawled out from under a rock. <img border="0" title="" alt="[Eek!]" src="images/icons/shocked.gif" /> Hey Jim, how are ya?
I did use a new crush washer with the new plug. The old one was mangled from being ripped out of the diff.
Terry Johnson Gettin' Off 4X4 Club'89 XCab SR5 V6 - D60 Hybrid SAS, Ultimate Marlin Crawler, Detroit rear, ARB front '97 TJ - Atlas 3.8 Twin Stick, ARB F&R, custom rollcage
|
|
Re: Leaky Diff
#56859
06/28/03 05:19 AM
|
Joined: Apr 2000
Posts: 4,230
Roll Me Over
|
Jim beat me to it but I was going to ask if you used a new CRUSH washer. Every time you take the plug out you need a new washer. Instead of shaving the front housing the last time I had it out I screwed the plug in from the inside, welded it up on the inside and outside, ground it smooth on the outside and JB welded a small magnet along side it on the inside. Drain it by taking out the two bottom studs!!!
Hi Jim, long time no hear from!!!!! <img border="0" title="" alt="[Big Grin]" src="images/icons/grin.gif" />
David Fritzsche 1990 Ex-Cab V-6,5-speed, with a few mods 04.5 CTD Dodge 2500 Ram--Tow Rig Roseville, CA
"Serenity through Sobriety"
|
|
Re: Leaky Diff
#56860
06/29/03 05:03 AM
|
Joined: Feb 2000
Posts: 4,160
Toyota Moderator
|
</font><blockquote><font size="1" face="Verdana, Tahoma, Arial, Helv, Helvetica, Sans">quote:</font><hr /><font size="2" face="Verdana, Tahoma, Arial, Helv, Helvetica, Sans">Originally posted by Terry4X4: <strong>My, my, look who crawled out from under a rock. <img border="0" title="" alt="[Eek!]" src="images/icons/shocked.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Tahoma, Arial, Helv, Helvetica, Sans">Looking at his sig, if he in fact "crawled," it must have been on his hands and knees and not his rig. <img border="0" alt="[Drunk]" title="" src="graemlins/drunk.gif" />
Stick around, we miss you on the boards, Jim! <img border="0" title="" alt="[Big Grin]" src="images/icons/grin.gif" />
|
|
Re: Leaky Diff
#56861
06/29/03 01:02 AM
|
|
Anonymous
Unregistered
|
</font><blockquote><font size="1" face="Verdana, Tahoma, Arial, Helv, Helvetica, Sans">quote:</font><hr /><font size="2" face="Verdana, Tahoma, Arial, Helv, Helvetica, Sans">Originally posted by ErikB: <strong> </font><blockquote><font size="1" face="Verdana, Tahoma, Arial, Helv, Helvetica, Sans">quote:</font><hr /><font size="2" face="Verdana, Tahoma, Arial, Helv, Helvetica, Sans">Originally posted by Terry4X4: <strong>My, my, look who crawled out from under a rock. <img border="0" title="" alt="[Eek!]" src="images/icons/shocked.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Tahoma, Arial, Helv, Helvetica, Sans">Looking at his sig, if he in fact "crawled," it must have been on his hands and knees and not his rig. <img border="0" alt="[Drunk]" title="" src="graemlins/drunk.gif" />
Stick around, we miss you on the boards, Jim! <img border="0" title="" alt="[Big Grin]" src="images/icons/grin.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Tahoma, Arial, Helv, Helvetica, Sans">Hi guys! <img border="0" title="" alt="[Big Grin]" src="images/icons/grin.gif" />
I missed you tooooooooo <img border="0" alt="[Nerd]" title="" src="graemlins/nerd.gif" />
Hands and knees? Look again. I did it on TWO wheels! <img border="0" title="" alt="[Cool]" src="images/icons/cool.gif" />
|
|
|
|