Head Bolt Size

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Head Bolt Size #569462 02/16/05 08:42 PM

Joined: Sep 2004

Posts: 44

Wisconsin

buckgrunter Offline

Getting the Wheeling Fever

Anybody know what size and pitch the head bolts are on the 22re? I want to make sure I have the right tap to clean out the threads when I do the head gasket. Thanks

Mike

89' SR5 Pick Em Up
22re W56 3" IFS Lift 33s 4.88s w/ lockrite front

Entire Thread
Subject	Posted By	Posted
Head Bolt Size	buckgrunter	02/16/05 08:42 PM
Re: Head Bolt Size	4Crawler	02/16/05 08:54 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.835s Queries: 15 (3.832s) Memory: 0.5935 MB (Peak: 0.6265 MB) Data Comp: Off Server Time: 2026-06-17 20:59:19 UTC
Valid HTML 5 and Valid CSS