Welding on axle housing?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Welding on axle housing? #570178 02/18/05 04:17 AM

Anonymous

Unregistered

I was just wondering if it's possible to warp an axle housing when welding a truss on? Has anyone done this? Is it possible if you lay a lot of short beads? Any help is greatly appreciated.

Entire Thread
Subject	Posted By	Posted
Welding on axle housing?	Anonymous	02/18/05 04:17 AM
Re: Welding on axle housing?	oldsub86	02/18/05 05:49 AM
Re: Welding on axle housing?	kyle-22r	02/18/05 05:49 AM
Re: Welding on axle housing?	OOP'S	02/18/05 05:51 AM
Re: Welding on axle housing?	J94_4runner	02/18/05 06:09 AM
Re: Welding on axle housing?	kyle-22r	02/18/05 06:10 AM
Re: Welding on axle housing?	Anonymous	02/18/05 08:50 PM
Re: Welding on axle housing?	OOP'S	02/19/05 01:32 AM
heating cast	hazman	02/18/05 06:15 AM
Re: heating cast	DirtyHarry	02/18/05 08:58 PM
Welding axle housings	Red_Chili	02/18/05 10:28 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.581s Queries: 15 (3.579s) Memory: 0.6092 MB (Peak: 0.6422 MB) Data Comp: Off Server Time: 2026-06-17 21:18:18 UTC
Valid HTML 5 and Valid CSS