Welding on axle housing?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: heating cast [Re: hazman] #570186 02/18/05 08:58 PM

Joined: Nov 2000

Posts: 4,192

Rapid City/Albuquerque/Reno

DirtyHarry Offline

Toyota Moderator

Quote

All that I know about welding on cast is that you need to heat up the area to be welded. rj

Toyota housings, like Ford 9"s, are stamped steel and very easy to weld on to.

Harry Wagner
Harry Situations
4x4Wire's Toyota Section

Entire Thread
Subject	Posted By	Posted
Welding on axle housing?	Anonymous	02/18/05 04:17 AM
Re: Welding on axle housing?	oldsub86	02/18/05 05:49 AM
Re: Welding on axle housing?	kyle-22r	02/18/05 05:49 AM
Re: Welding on axle housing?	OOP'S	02/18/05 05:51 AM
Re: Welding on axle housing?	J94_4runner	02/18/05 06:09 AM
Re: Welding on axle housing?	kyle-22r	02/18/05 06:10 AM
Re: Welding on axle housing?	Anonymous	02/18/05 08:50 PM
Re: Welding on axle housing?	OOP'S	02/19/05 01:32 AM
heating cast	hazman	02/18/05 06:15 AM
Re: heating cast	DirtyHarry	02/18/05 08:58 PM
Welding axle housings	Red_Chili	02/18/05 10:28 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.571s Queries: 16 (3.569s) Memory: 0.6124 MB (Peak: 0.6453 MB) Data Comp: Off Server Time: 2026-06-20 11:26:16 UTC
Valid HTML 5 and Valid CSS