Head removal- help needed

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Head removal- help needed #57060 06/25/03 11:32 PM

Joined: Sep 2002

Posts: 1,257

Tacoma, Washington

Frankenyota Offline

Body Damage is Cool

Yup that is one of the two "hidden" head/intake bolts. Take Darin's advice and pull the head/intake as a combo, it makes life easier, trust me on this one Darin has been pulling a lot of heads/intakes/engines lately :-P

1986 4X4, 1991 22RE, 5.71 gears,ARB Rear, aux fuel tank, 3mm O/S TB/intake, engnbldr cam, LCE header, magnaflow w/2.25 exh. custom 4 color paint job :-P 33X12.5 Goodyear MT/Rs

Entire Thread
Subject	Posted By	Posted
Head removal- help needed	jsanch	06/25/03 10:49 PM
Re: Head removal- help needed	Esquire812	06/25/03 11:21 PM
Re: Head removal- help needed	Frankenyota	06/25/03 11:32 PM
Re: Head removal- help needed	jsanch	06/26/03 02:14 AM
Re: Head removal- help needed	Esquire812	06/26/03 06:45 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.494s Queries: 15 (3.539s) Memory: 0.6009 MB (Peak: 0.6339 MB) Data Comp: Off Server Time: 2026-06-25 10:44:41 UTC
Valid HTML 5 and Valid CSS