Rebuilt engine startup question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rebuilt engine startup question [Re: 79Toy4x4] #571501 02/22/05 09:41 AM

Joined: Sep 2003

Posts: 286

Calif.

BennyBoy

Mudrunner

Removed the oil pressure relief valve nut, pour some oil in, replace the nut.
Than pull the sparkplugs and crank it over ontill the oil light go's out(should take about 5 secs).

Entire Thread
Subject	Posted By	Posted
Rebuilt engine startup question	79Toy4x4	02/21/05 06:00 AM
Re: Rebuilt engine startup question	missouriman	02/22/05 04:44 AM
Re: Rebuilt engine startup question	79Toy4x4	02/23/05 03:11 AM
Re: Rebuilt engine startup question	Staceman	02/23/05 03:21 PM
Re: Rebuilt engine startup question	xrtim	02/24/05 12:30 AM
Re: Rebuilt engine startup question	79Toy4x4	02/28/05 01:03 AM
Re: Rebuilt engine startup question	willzrunna96	02/28/05 01:20 AM
Re: Rebuilt engine startup question	Staceman	02/28/05 03:43 PM
Re: Rebuilt engine startup question	Red_Chili	02/28/05 05:11 PM
Re: Rebuilt engine startup question	Esquire812	02/22/05 09:03 AM
Re: Rebuilt engine startup question	BennyBoy	02/22/05 09:41 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.486s Queries: 16 (3.484s) Memory: 0.6147 MB (Peak: 0.6477 MB) Data Comp: Off Server Time: 2026-06-13 07:46:36 UTC
Valid HTML 5 and Valid CSS