Clutch Backing Plate??

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Clutch Backing Plate?? #571847 02/22/05 12:48 AM

Joined: Jan 2004

Posts: 63

Thompsons Station, TN

rmg

Getting the Wheeling Fever

Quick question. When I replaced my clutch bracket, I didn't realize that there was a backing plate also. Anyway, I finally ordered that part. My question is: Which side of the firewall is the backing plate installed on? I am assuming on the master cylinder side. Am I correct?

Thanks.

Ryan
95 T100 2WD ExtCab
All Stock

Entire Thread
Subject	Posted By	Posted
Clutch Backing Plate??	rmg	02/22/05 12:48 AM
Re: Clutch Backing Plate??	Bill_R	02/22/05 01:16 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.454s Queries: 15 (3.452s) Memory: 0.5940 MB (Peak: 0.6270 MB) Data Comp: Off Server Time: 2026-06-19 10:24:25 UTC
Valid HTML 5 and Valid CSS