Clutch Questions

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Clutch Questions #57287 06/27/03 06:38 PM

Anonymous

Unregistered

Bonzai,

It does not appear to be leaking at all. when it stopped working the clutch pedal got a lot easier to press in. But I have watched the movement of the slave rod when the clutch is pressed and it appears to be working correcty. I think that I will replace the Master Cylinder first and see if that fixes it. thanks for the reply

Troy

Entire Thread
Subject	Posted By	Posted
Clutch Questions	Anonymous	06/28/03 05:30 AM
Re: Clutch Questions	Bonzai	06/27/03 06:12 PM
Re: Clutch Questions	Anonymous	06/27/03 06:38 PM
Re: Clutch Questions	Red_Chili	06/27/03 06:40 PM
Re: Clutch Questions	Bonzai	06/27/03 06:47 PM
Re: Clutch Questions	gota87toy	06/27/03 07:01 PM
Re: Clutch Questions	Anonymous	06/27/03 07:02 PM
Re: Clutch Questions	Anonymous	06/28/03 02:09 AM
Re: Clutch Questions	OOP'S	06/28/03 05:29 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.650s Queries: 15 (3.648s) Memory: 0.6075 MB (Peak: 0.6405 MB) Data Comp: Off Server Time: 2026-06-08 13:28:01 UTC
Valid HTML 5 and Valid CSS