Clutch Questions

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Clutch Questions #57290 06/27/03 07:01 PM

Joined: Jun 2001

Posts: 934

Prescott, Az

gota87toy

Rock Warrior

Both the clutch slave and master cylinder are rebuildable at about 25 bones for both kits. If the bores are good, it's a he!! of a lot cheaper than buying aftermarket junk.

"Nine-11 changed me," he said. "I'm shocked that it didn't change the whole country, frankly."

Dennis Miller

Entire Thread
Subject	Posted By	Posted
Clutch Questions	Anonymous	06/28/03 05:30 AM
Re: Clutch Questions	Bonzai	06/27/03 06:12 PM
Re: Clutch Questions	Anonymous	06/27/03 06:38 PM
Re: Clutch Questions	Red_Chili	06/27/03 06:40 PM
Re: Clutch Questions	Bonzai	06/27/03 06:47 PM
Re: Clutch Questions	gota87toy	06/27/03 07:01 PM
Re: Clutch Questions	Anonymous	06/27/03 07:02 PM
Re: Clutch Questions	Anonymous	06/28/03 02:09 AM
Re: Clutch Questions	OOP'S	06/28/03 05:29 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.460s Queries: 15 (3.458s) Memory: 0.6081 MB (Peak: 0.6411 MB) Data Comp: Off Server Time: 2026-06-09 00:18:50 UTC
Valid HTML 5 and Valid CSS