Thinking about an Aussie locker...

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Thinking about an Aussie locker... [Re: enutter] #574244 02/28/05 09:43 PM

Joined: Dec 1999

Posts: 1,056

Silver Spring, MD, USA

John Smith Offline

Body Damage is Cool

I would go front so you don't have any of the quirks unless you lock in the front hubs. If you don't have manual front hubs get some.

John Smith 79 FJ40
87 StdCab w/22R TLCA# 9074

Entire Thread
Subject	Posted By	Posted
Thinking about an Aussie locker...	enutter	02/28/05 05:30 PM
Re: Thinking about an Aussie locker...	John Smith	02/28/05 09:43 PM
Re: Thinking about an Aussie locker...	SHAD	03/01/05 12:02 AM
Re: Thinking about an Aussie locker...	enutter	03/02/05 01:29 AM
Re: Thinking about an Aussie locker...	ChrisH	03/02/05 01:53 AM
Re: Thinking about an Aussie locker...	TheBandit	03/02/05 02:41 AM
Re: Thinking about an Aussie locker...	SHAD	03/02/05 03:04 AM
Re: Thinking about an Aussie locker...	tucker80	03/02/05 03:16 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.633s Queries: 16 (3.630s) Memory: 0.6052 MB (Peak: 0.6382 MB) Data Comp: Off Server Time: 2026-06-02 15:32:37 UTC
Valid HTML 5 and Valid CSS